Building pumps & plumbing

Hot water systems for apartments and commercial buildings.

No hot water, a leaking unit, or hot water that takes minutes to reach the upper floors — in a shared building it affects everyone. We repair and replace hot water units, look after central hot water plant, and service the circulation pumps that keep hot water at every tap.

In short

PMP repairs, replaces and maintains hot water systems in strata, commercial and aged care buildings across WA — individual units, central plant and the circulation pumps that keep hot water at every tap — with licensed plumbers and 24/7 breakdown cover.

In plain words: A hot water circulation system uses a small pump to keep hot water moving around a building's pipework, so it arrives quickly at every outlet instead of running cold first.

Area: all of Western Australia · Updated

What we do

Hot water unit replacement

Like-for-like or upgraded units in apartments, offices, amenities and tenancies, installed and commissioned by licensed plumbers.

Repairs and breakdowns

No hot water, lukewarm water, leaking cylinders, relief valves discharging and units that keep tripping — found and fixed, 24/7 for breakdowns.

Central hot water plant

Storage and plant serving a whole building, maintained on a schedule so a failure doesn't take out hot water for every resident at once.

Circulation pumps

The pumps that keep hot water moving through the building, repaired or replaced when hot water is slow to arrive or the pump is noisy or has failed.

Signs it needs attention

  • No hot water, or water that is only lukewarm
  • Hot water takes a long time to reach taps, especially on upper floors
  • Water leaking from the unit, or the relief valve running constantly
  • Rusty or discoloured hot water
  • A noisy circulation pump, or one that has stopped
  • The unit trips the power or shows a fault

How a replacement works

  1. Assess. The existing unit, its location, access, supply and the outlets it serves.
  2. Quote the options. Like-for-like or upgraded, with the time without hot water kept as short as possible.
  3. Install. Old unit out, new unit in, with valves, tempering valve and relief drain fitted to AS/NZS 3500.4-2025.
  4. Commission. Temperatures checked at the unit and the outlets; relief and tempering valves tested.
  5. Certify. A Certificate of Compliance where the work requires one, and an itemised job report.

One team for the pumps and the plumbing

Slow hot water in a large building is often a pump problem, not a plumbing one — and the reverse. Because the same company looks after your pressure pumps, circulation pumps and plumbing, there is one visit, one report and clear responsibility for the fix.

Recent work

Hot water

Hot water units replaced in pool and gym amenities

Strata apartments · Nedlands

Scope
Two electric storage hot water units serving the pool and gym amenities had reached the end of their life; condensation in the cupboards had damaged the controls.
Delivery
Both units replaced with new 50 L units, each with a new tempering valve, installed to AS/NZS 3500.4, with a recommendation to ventilate the cupboards.

Hot water

Hot water compliance upgrade for a commercial tenancy

Commercial tenancy · Perth CBD

Scope
An electric storage hot water unit serving basins needed to be brought up to standard.
Delivery
Pressure reducing valve, cold relief valve, safe tray with tundish waste and a new tempering valve fitted, so outlets deliver no more than 50°C.

Hot water

Annual service of central hot water units

Strata apartments · Nedlands

Scope
Four central hot water units serving the building, serviced against a 14-point checklist.
Delivery
Temperatures, circulating pumps, relief valves, flushing and anodes checked; a cylinder found running cold with its circulating pumps off and a dripping relief valve were reported with recommendations.

What you receive

An itemised job report, and a Certificate of Compliance where the work requires one. Workmanship guaranteed for 12 months.

Your paperwork, job by job

Photos that help us price it

  1. The unit's label or nameplate
  2. The whole unit with its pipework
  3. The circulation pump nameplate, if there is one
  4. The leak or fault

Send them with the quote form, text or WhatsApp them to 0439 729 553, or email support@pmpwa.net.au. Already have a service report or defect list? Attach that too.

Related questions

Questions people ask

Do you replace hot water systems in apartment buildings?

Yes. We replace individual hot water units in apartments and tenancies, and maintain central hot water plant that serves a whole building, for strata and building managers across WA.

Do you repair hot water circulation pumps?

Yes. Pumps are where our business started. We repair or replace them and check the rest of the circulation system while we are there.

How quickly can you replace a hot water unit?

It depends on the unit, the access and what is in stock. We give you a time when you call, and plan the work to keep the time without hot water as short as possible.

Do you work on hot water systems outside Perth?

Yes. We work across all of Western Australia, including regional sites.

Do you service central hot water systems in apartment buildings?

Yes. We service central hot water units and their circulating pumps, checking temperatures, relief valves, flushing and anodes, and report anything that needs attention.